fsck'd my drive

After a few power failures during a week of storms I rebooted my Ubuntu Linux computer and fsck found some errors. Next time I booted it found (and corrected) even more errors, until, eventually I wasn't able to boot anymore (couldn't find grub).

I have a good backup system* so I wasn't too concerned (although this was my first real test).  I had run smartctl on the first sign of trouble and it didn't give any errors, so it didn't appear to be a hard disk failure. I figure this is an opportunity for me to setup 64bit version of Ubunt and I've also been thinking about dual booting to Windows® because Steam looks like an easy and cheap way to install games.

I put an old version of Windows XP in the drive and... it blue screened.  It just didn't want to install.  I tried two other versions and it also failed.  I then got the Ubuntu disk and it installed with no problems.  I tried Windows again, again it failed to install even though I had reformatted the disk when install Linux.

After much forth and back I decided to reset my BIOS to factory defaults, and low and behold, Windows installed!  Not very nicely, however.  I had no Ethernet, no sound, slow graphics and in only one monitor, but at least it was running.  I then installed 64 bit Ubuntu desktop and proceeded to restore all my files.

Next day I went back to Windows to figure out what was wrong.  It's been years since I've touched Windows and I was at a loss. How can I get the updates if it can't connect to the internet? Then I thought every time we buy some device it comes with a little CD which I normally throw out - I wonder why they do that?  Do people still use CDs, how archaic?

So I put in the CD for my motherboard which I luckily happened to have kept and in installed the drivers for Ethernet and sound and I was back business. Now I have Steam installed and the Torchlight game I bought for $5 bucks.  I'm a little sad that my computer has Windows on it, but such is life.

*Actually, I should have also backed up my package list (i.e. dpkg --get-selections) and my cron list (crontab -l), then it would have been even more painless. I've updated my backup program to dump out this information as well.

Comments

Modern Farming Methods said…
Informative post.
2:08 pm
Post a Comment

Popular posts from this blog

Shortest Sudoku solver in Python

Mark Byer's site has some more Sudoku solvers here's a short one in Python that's only 178 bytes long: def r(a):i=a.find('0');~i or exit(a);[m in[(i-j)%9*(i/9^j/9)*(i/27^j/27|i%9/3^j%9/3)or a[j]for j in range(81)]or r(a[:i]+m+a[i+1:])for m in'%d'%5**18] from sys import*;r(argv[1]) On the site is also shown a longer Perl version at 185 bytes: use integer;sub R{for$i(grep!$A[$_],@x=0..80){%t=map{$_/27-$i/27|$_%9/3-$i%9/3&&amp;amp;amp;$_ /9-$i/9&&($_-$i)%9?0:$A[$_]=>1}@x;R($A[$i]=$_)for grep!$t{$_},1..9;return$A[$i]=0} die@A}@A=split//,<>;R I think the Python version is slightly easier to understand, although they are both quite cryptic. I'm not sure why I find these programs fascinating. I think it reminds me that any program can be written in such a way that it's cryptic, even in Python. In addition, the code is small enough that you should be able to figure out how it works, and may learn something the process. Related is
Read more

Seven Segment Display in Inkscape

Image
Today I got a little sidetracked while working on my key-train (keyboard training) project.  I thought I might spruce it up a little by using a seven segment display for the digits (say for the words per minutes), similar to what kTouch has.  I found an open source font, but it appears to be difficult to just use a ttf font in GTK. So I figured, it's only 10 images, I'll just make them in svg. I vaguely remembered a heathenx inkscape podcast  describing how to make an LCD display and decided to use that at my base. Unfortunately, they didn't provide any source files in the show-notes (as far as I could see) so I had to watch and redo the drawings myself! By naming each of the seven segments I could create the 10 digits simply by deleting a few elements in one template svg file .  I can create the template as beautiful as I like and quickly create the 10 derived images with these programs . Unfortunately, both ImageMagick and GraphicsMagick don't handle
Read more

Dot to Png

Image
For fun I wasted some time creating diagrams using the dot language. It's pretty fast to get a diagram out, except that there are a lot of things you can't do, like make shadows or rounded and filled rectangles. With this dot code: digraph "User Clicks" { node [ shape="rectangle" style="filled" ] server [label="Server"] java [shape="ellipse" label="Java\nCode"] provider [label="Service\nProvider"] browser [label="Firefox"] browser->server[label=<&#9312; AJAX Sends Session ID>]; server->java[label=<&#9313; Confirms Session ID>]; java->provider[label=<&#9314; Makes HTTPS call>]; provider->java[label=<&#9315; Results>]; java->server[label=<&#9316; Results>]; server->browser[label=<&#9317; Results>]; } You can click on the image to see the SVG rendered in Firefox, if you use that. I wrote a little python program to call t
Read more